Chrome 90mm Fast Flow Waste Trap for Shower Enclosure Tray with Fittings
£7.00£7.00
- Type: Tray Waste
- Room: Bathroom
- Shape: Round
- Style: Contemporary
- Material: Plastic
Buy More, Save More
Description
For Large/Bulk orders, please send us a message on WhatsApp at +44 7830 194368
The Chrome 90mm Fast Flow Waste Trap for Shower Enclosure Tray is a high-capacity shower tray drain designed for rapid water removal. It’s used wherever a shower tray has a standard 90mm waste outlet – for example, slimline or stone shower trays and walk-in cubicles. The polished chrome cover gives a sleek, modern look. This trap is aimed at plumbers, installers and DIY remodelers who are fitting or upgrading shower enclosures. Its fast flow design (up to ~32 L/min) quickly clears water, preventing pooling – ideal for busy bathrooms or pumped showers.
Specification of 90mm Fast Flow Waste Trap for Shower Enclosure Tray:
| Specification | Details of 90mm Fast Flow Waste Trap for Shower Enclosure Tray |
| Dimensions | Cover Ø ~115 mm; Height ~95 mm |
| Material | Durable ABS plastic body with chrome-plated finish |
| Waste Type | Shower tray waste trap (fast-flow design) |
| Flow Rate | High flow – up to 32 liters per minute |
| Connection Size | UK standard 1½″ (40 mm) waste outlet |
| Tray Compatibility | Fits all standard UK shower trays with a 90 mm waste hole |
| Fittings Included | 40 mm angle compression connector (with rubber seal) |
| Installation Notes | Top-access removable dome for easy cleaning; suitable for pumped/power showers |
Additional information
| Weight | 0.1 kg |
|---|
FAQs
Can I Get Free Delivery?
Yes, you can get free delivery on orders above £500.
What size hole does a 90mm fast-flow shower waste need?
A 90mm fast-flow waste is made to sit in a 90 mm diameter tray hole (the visible dome/grid matches a 90 mm opening) — the tray outlet and flange are sized so the waste seats flush in that hole.
Will a 90mm waste connect to a standard 40mm soil/waste pipe?
Yes — most 90 mm shower wastes use a 1½″ threaded outlet but either include an adaptor or are fitted to a reducer/connector to a 40 mm outlet, so they connect to the common UK 40 mm waste pipe. Always check the pack contents for the adaptor.
How do I install a 90mm fast-flow shower waste?
Typical steps: remove the dome/upper assembly, position the seals, push the waste into the tray hole, apply a bead of silicone under the flange if recommended, screw up the trap body and hand-tighten the fixing nut (use a spanner only if needed), fit the outlet adaptor to the pipe and test for leaks before final seal-off. Installation leaflets for most 90 mm wastes show the same top-access, hand-tightened assembly.
How do you clean a 90mm fast-flow waste if it blocks?
Most are top access: pull off the dome, twist and lift the inner basket/trap insert, clear hair and debris, wipe seals and reassemble. Quick-release or removable baskets make maintenance fast — no need to dismantle the whole trap in most cases.
How fast does a 90mm “fast-flow” waste drain (flow rate)?
“Fast-flow” is a marketing name, but real performance varies by model and test conditions — common published values range roughly from 24 to 32 L/min, and some manufacturer test data show up to ≈39 L/min (0.65 L/s at 15 mm head). Please refer to the manufacturer’s technical data for the exact model if you require an official figure.
Can I use a 90mm fast-flow waste with a low-profile (shallow) tray?
Often yes — many 90 mm wastes are designed as low-profile/top-access units and include shallow traps or offset elbows for tight voids. But check the trap's physical height (specified in mm) against the tray cavity depth before buying to ensure the trap and any elbow/adaptor will fit.
Reviews
There are no reviews yet.